By The Nate Meyer ยท Published
The Kingston KVR56S46BS8-16 is a 16GB DDR5-5600 SO-DIMM for compatible notebook computers, compact systems, and other platforms using standard DDR5 laptop memory. It operates at 5600 MT/s with a CAS latency of CL46 and uses a 262-pin small-outline form factor. The module is built as a single-rank, x8 organization and uses unbuffered, non-ECC DDR5 SDRAM at 1.1V. It is intended for systems that support DDR5 SO-DIMMs and may operate at a lower speed when required by the host platform. Confirm the system's memory type, maximum module capacity, and supported speed before installation.
| Part Number | KVR56S46BS8-16 |
| Manufacturer | Kingston |
| Type | DDR5 SDRAM |
| Form Factor | 262-pin SO-DIMM |
| Capacity | 16GB |
| Memory Speed | DDR5-5600 |
| Data Rate | 5600 MT/s |
| CAS Latency | CL46 |
| Organization | 1Rx8 |
| ECC | Non-ECC |
| Registered | Unbuffered |
| Voltage | 1.1V |
| Warranty | Limited lifetime warranty |
16GB DDR5-5600 capacity in a 262-pin SO-DIMM form factor.
Non-ECC, unbuffered, single-rank memory operating at 1.1V.
Requires a compatible system with DDR5 SO-DIMM support.
It is compatible with systems that provide 262-pin DDR5 SO-DIMM slots and support a 16GB DDR5 memory module. Check the system or motherboard documentation for supported capacity and memory speed.
No. DDR5 SO-DIMMs use a different electrical specification and keying position from DDR4 modules and are not interchangeable.
No. The host system's processor and firmware determine the supported memory speed. A platform with a lower supported speed may run the module at that lower rate.
It can be mixed only when the system supports the combined capacity and module configuration. Mixed modules commonly operate at the speed and timings supported by the slowest installed module.
No. System memory does not require an operating system driver. The system firmware detects the module during startup.